| Skip Navigation Links | |
| Exit Print View | |
|
Oracle Solaris 11.1 Administration: Devices and File Systems Oracle Solaris 11.1 Information Library |
| Skip Navigation Links | |
| Exit Print View | |
|
|
Oracle Solaris 11.1 Administration: Devices and File Systems Oracle Solaris 11.1 Information Library |
1. Managing Removable Media (Tasks)
2. Writing CDs and DVDs (Tasks)
4. Dynamically Configuring Devices (Tasks)
5. Managing USB Devices (Tasks)
6. Using InfiniBand Devices (Overview/Tasks)
9. Administering Disks (Tasks)
Identifying COMSTAR Software and Hardware Requirements
Configuring Storage Devices With COMSTAR (Task Map)
Configuring Dynamic or Static Target Discovery
Configuring Storage Devices With COMSTAR (Tasks)
How to Enable the STMF Service
How to Back Up and Restore a COMSTAR Configuration
How to Enable iSNS Discovery for the Target Device
How to Configure an IB HCA for iSER
Creating iSCSI Target Portal Groups
How to Create a Target Portal Group for iSCSI Targets
Making SCSI Logical Units Available
How to Make a Logical Unit Available to All Systems
How to Restrict Logical Unit Access to Selected Systems
Configuring Fibre Channel Devices With COMSTAR
Configuring Fibre Channel Ports With COMSTAR
How to Display Existing FC Port Bindings
How to Set All FC Ports to a Specific Mode
How to Set Selected FC Ports to Initiator or Target Mode
Making Logical Units Available for FC and FCoE
How to Make Logical Units Available for FC and FCoE
Configuring FCoE Devices With COMSTAR
Enabling 802.3x PAUSE and Jumbo Frames on the Ethernet Interface
How to Create FCoE Target Ports
How to Verify That an FCoE Target Port Is Working
How to Delete FCoE Target Ports
Configuring SRP Devices With COMSTAR
How to Enable the SRP Target Service
How to Verify SRP Target Status
12. Configuring and Managing the Oracle Solaris Internet Storage Name Service (iSNS)
13. The format Utility (Reference)
14. Managing File Systems (Overview)
15. Creating and Mounting File Systems (Tasks)
16. Configuring Additional Swap Space (Tasks)
17. Copying Files and File Systems (Tasks)
This chapter describes how to configure Common Multiprotocol SCSI TARget, or COMSTAR, a software framework that enables you to convert any Oracle Solaris 11 host into a SCSI target device that can be accessed over a storage network by initiator hosts.
This means you can make storage devices on a system available to Linux, Mac OS, or Windows client systems as if they were local storage devices. Supported storage protocols are iSCSI, FC, iSER, and SRP.
For information about configuring iSCSI initiators, see Chapter 4, Configuring Solaris iSCSI Initiators, in Oracle Solaris 11.1 Administration: SAN Configuration and Multipathing.
For information about the iSNS support in Oracle Solaris, see Chapter 12, Configuring and Managing the Oracle Solaris Internet Storage Name Service (iSNS).
For troubleshooting general iSCSI configuration problems in Oracle Solaris, see Troubleshooting iSCSI Configuration Problems in Oracle Solaris 11.1 Administration: SAN Configuration and Multipathing.
|