Skip Navigation Links | |
Exit Print View | |
man pages section 3: Curses Library Functions Oracle Solaris 11.1 Information Library |
- graphics interface
cc [ flag ... ] file ... -lplot [ library... ] #include <plot.h> void arc(short x0, short y0, short x1, short y1, short x2, short y2);
void box(short x0, short y0, short x1, short y1);
void circle(short x, short y, short r);
void closepl();
void closevt();
void cont(short x, short y);
void erase();
void label(char *s);
void line(short x0, short y0, short x1, short y1);
void linemod(char *s);
void move(short x, short y);
void openpl();
void openvt();
void point(short x, short y);
void space(short x0, short y0, short x1, short y1);
These functions generate graphics output for a set of output devices. The format of the output is dependent upon which link editor option is used when the program is compiled and linked (see Link Editor).
The term current point refers to the current setting for the x and y coordinates.
The arc() function specifies a circular arc. The coordinates (x0, y0) specify the center of the arc. The coordinates (x1, y1) specify the starting point of the arc. The coordinates (x2, y2) specify the end point of the circular arc.
The box() function specifies a rectangle with coordinates (x0, y0), (x0, y1), (x1, y0), and (x1, y1). The current point is set to (x1, y1).
The circle() function specifies a circle with a center at the coordinates (x, y) and a radius of r.
The closevt() and closepl() functions flush the output.
The cont() function specifies a line beginning at the current point and ending at the coordinates (x, y). The current point is set to (x, y).
The erase() function starts another frame of output.
The label() function places the null terminated string s so that the first character falls on the current point. The string is then terminated by a NEWLINE character.
The line() function draws a line starting at the coordinates (x0, y0) and ending at the coordinates (x1, y1). The current point is set to (x1, y1).
The linemod() function specifies the style for drawing future lines. s may contain one of the following: dotted, solid, longdashed, shortdashed, or dotdashed.
The move() function sets the current point to the coordinates (x, y).
The openpl() or openvt() function must be called to open the device before any other plot functions are called.
The point() function plots the point given by the coordinates (x, y). The current point is set to (x, y).
The space() function specifies the size of the plotting area. The plot will be reduced or enlarged as necessary to fit the area specified. The coordinates (x0, y0) specify the lower left hand corner of the plotting area. The coordinates (x1, y1) specify the upper right hand corner of the plotting area.
Various flavors of these functions exist for different output devices. They are obtained by using the following ld(1) options:
device-independent graphics stream on standard output in the format described in plot(4B)
GSI 300 terminal
GSI 300S terminal
Tektronix 4014 terminal
GSI 450 terminal
shared object
64-bit shared object
shared object
64-bit shared object
shared object
64-bit shared object
shared object
64-bit shared object
shared object
64-bit shared object
shared object
64-bit shared object
See attributes(5) for descriptions of the following attributes:
|
ld(1), libplot(3LIB), plot(4B), attributes(5)