How to Recover Boot Failure in Single User Mode - Oracle Solaris 11.1 Administration: SAN Configuration and Multipathing

Skip Navigation Links
Exit Print View
	Oracle Solaris 11.1 Administration: SAN Configuration and Multipathing Oracle Solaris 11.1 Information Library

Oracle Technology Network

Document Information

1. Solaris I/0 Multipathing Overview

2. Fibre Channel Multipathing Configuration Overview

3. Configuring Solaris I/O Multipathing Features

4. Administering Multipathing Devices

5. Configuring Fabric-Connected Devices

6. Configuring Solaris iSCSI Initiators

7. Configuring Virtual Fibre Channel Ports

8. Configuring FCoE Ports

9. Configuring SAS Domains

10. Configuring IPFC SAN Devices

11. Booting the Oracle Solaris OS From Fibre Channel Devices on x86 Based Systems

12. Persistent Binding for Tape Devices

A. Manual Configuration for Fabric-Connected Devices

B. Supported FC-HBA API

C. Troubleshooting Multipathed Device Problems

System Fails to Boot During stmsboot

How to Recover Boot Failure in Single User Mode

System Crashes During stmsboot

How to Recover from a System Crash

How to Recover Boot Failure in Single User Mode

Type the root password and enter single user mode.
Restart the mpxio-upgrade service.
```
# svcadm restart svc:/system/device/mpxio-upgrade:default
```
If this command is not successful, follow the instructions in the next section to recover your original configuration.

Copyright © 2009, 2012, Oracle and/or its affiliates. All rights reserved. Legal Notices

Previous

Next