JavaScript is required to for searching.
Skip Navigation Links
Exit Print View
Writing Device Drivers     Oracle Solaris 11.1 Information Library
search filter icon
search icon

Document Information

Preface

Part I Designing Device Drivers for the Oracle Solaris Platform

1.  Overview of Oracle Solaris Device Drivers

2.  Oracle Solaris Kernel and Device Tree

3.  Multithreading

4.  Properties

5.  Managing Events and Queueing Tasks

6.  Driver Autoconfiguration

7.  Device Access: Programmed I/O

8.  Interrupt Handlers

9.  Direct Memory Access (DMA)

10.  Mapping Device and Kernel Memory

11.  Device Context Management

12.  Power Management

13.  Hardening Oracle Solaris Drivers

14.  Layered Driver Interface (LDI)

Part II Designing Specific Kinds of Device Drivers

15.  Drivers for Character Devices

16.  Drivers for Block Devices

17.  SCSI Target Drivers

18.  SCSI Host Bus Adapter Drivers

19.  Drivers for Network Devices

20.  USB Drivers

21.  SR-IOV Drivers

Part III Building a Device Driver

22.  Compiling, Loading, Packaging, and Testing Drivers

23.  Debugging, Testing, and Tuning Device Drivers

24.  Recommended Coding Practices

Part IV Appendixes

A.  Hardware Overview

SPARC Processor Issues

SPARC Data Alignment

Member Alignment in SPARC Structures

SPARC Byte Ordering

SPARC Register Windows

SPARC Multiply and Divide Instructions

x86 Processor Issues

x86 Byte Ordering

x86 Architecture Manuals

Endianness

Store Buffers

System Memory Model

Total Store Ordering (TSO)

Partial Store Ordering (PSO)

Bus Architectures

Device Identification

Supported Interrupt Types

Bus Specifics

PCI Local Bus

PCI Address Domain

PCI Configuration Address Space

PCI Configuration Base Address Registers

PCI Memory Address Space

PCI I/O Address Space

PCI Hardware Configuration Files

PCI Express

SBus

SBus Physical Address Space

Physical SBus Addresses

SBus Hardware Configuration Files

Device Issues

Timing-Critical Sections

Delays

Internal Sequencing Logic

Interrupt Issues

PROM on SPARC Machines

Open Boot PROM 3

Forth Commands

Walking the PROMs Device Tree

Mapping the Device

Reading and Writing

B.  Summary of Oracle Solaris DDI/DKI Services

C.  Making a Device Driver 64-Bit Ready

D.  Console Frame Buffer Drivers

E.  pci.conf File

Index

Store Buffers

To improve performance, the CPU uses internal store buffers to temporarily store data. Using internal buffers can affect the synchronization of device I/O operations. Therefore, the driver needs to take explicit steps to make sure that writes to registers are completed at the proper time.

For example, consider the case where access to device space, such as registers or a frame buffer, is synchronized by a lock. The driver needs to check that the store to the device space has actually completed before releasing the lock. The release of the lock does not guarantee the flushing of I/O buffers.

To give another example, when acknowledging an interrupt, the driver usually sets or clears a bit in a device control register. The driver must ensure that the write to the control register has reached the device before the interrupt handler returns. Similarly, a device might require a delay, that is, driver busy-waits, after writing a command to the control register. In such a case, the driver must ensure that the write has reached the device before delaying.

Where device registers can be read without undesirable side effects, verification of a write can simply consist of reading the register immediately after the write. If that particular register cannot be read without undesirable side effects, another device register in the same register set can be used.