JavaScript is required to for searching.
Skip Navigation Links
Exit Print View
Oracle Solaris 11.1 Administration: SAN Configuration and Multipathing     Oracle Solaris 11.1 Information Library
search filter icon
search icon

Document Information

Preface

1.  Solaris I/0 Multipathing Overview

2.  Fibre Channel Multipathing Configuration Overview

3.  Configuring Solaris I/O Multipathing Features

4.  Administering Multipathing Devices

5.  Configuring Fabric-Connected Devices

6.  Configuring Solaris iSCSI Initiators

7.  Configuring Virtual Fibre Channel Ports

8.  Configuring FCoE Ports

9.  Configuring SAS Domains

10.  Configuring IPFC SAN Devices

11.  Booting the Oracle Solaris OS From Fibre Channel Devices on x86 Based Systems

12.  Persistent Binding for Tape Devices

A.  Manual Configuration for Fabric-Connected Devices

Manually Configuring FC Devices

How to Manually Configure a FC Device

Configuring Fabric Device Nodes

Ensuring That LUN Level Information Is Visible

How to Ensure LUN Level Information is Visible

How to Detect Visible Fabric Devices on a System

Configuring Device Nodes Without Multipathing Enabled

How to Manually Configure an FC Device Without Multipathing

How to Configure Multiple FC Devices Without Multipathing

Configuring Device Nodes With Solaris Multipathing Enabled

How to Configure Individual Multipathed FC Devices

How to Configure Multiple Multipathed FC Devices

Unconfiguring Fabric Devices

Unconfiguring a Fabric Device

How to Manually Unconfigure a FC Device

How to Unconfigure All FC Devices on a FC Host Port

How to Unconfigure a Multipathed FC Device

How to Unconfigure One Path to a Multipathed FC Device

How to Unconfigure All Multipathed FC Devices

B.  Supported FC-HBA API

C.  Troubleshooting Multipathed Device Problems

Index

How to Unconfigure All FC Devices on a FC Host Port

This procedure describes how to unconfigure all configured fabric devices that are attached to a fabric-connected host port.

  1. Become an administrator.
  2. Identify the fabric devices to be unconfigured.

    Only devices on a fabric-connected host port can be unconfigured.

    # cfgadm -al
    Ap_Id                Type         Receptacle   Occupant     Condition
    c0                 fc-fabric   connected    configured   unknown
    c0::50020f2300006077 disk      connected    configured   unknown
    c0::50020f23000063a9 disk      connected    configured   unknown
    c1                 fc-private  connected    configured   unknown
    c1::220203708b69c32b disk      connected    configured   unknown
    c1::220203708ba7d832 disk      connected    configured   unknown
  3. Stop all activity to each fabric device on the selected port and unmount any file systems on each fabric device.

    If the device is under any volume manager’s control, see the documentation for your volume manager before unconfiguring the device.

    # cfgadm -c unconfigure c0
  4. Unconfigure all of the configured fabric devices on a selected port.

    Note - This operation repeats the unconfigure operation of an individual device for all the devices on c0. This process can be time-consuming if the number of devices on c0 is large.


  5. Verify that all the devices on c0 are unconfigured.
    # cfgadm -al
    Ap_Id                Type         Receptacle   Occupant     Condition
    c0                   fc-fabric    connected    unconfigured unknown
    c0::50020f2300006077 disk         connected    unconfigured unknown
    c0::50020f23000063a9 disk         connected    unconfigured unknown
    c1                   fc-private   connected    configured   unknown
    c1::220203708b69c32b disk         connected    configured   unknown
    c1::220203708ba7d832 disk         connected    configured   unknown

    Notice that the Occupant column of c0 and all the fabric devices attached to it are displayed as unconfigured.