How to Manually Unconfigure a FC Device

This procedure describes how to unconfigure a fabric device that is attached to the fabric-connected host port c0.

1. Become an administrator.
2. Identify the device to be unconfigured.

   Only devices on a fabric-connected host port can be unconfigured.

   # cfgadm -al
   Ap_Id                 Type         Receptacle   Occupant    Condition
   c0                   fc-fabric  connected    configured   unknown
   c0::50020f2300006077 disk       connected    configured   unknown
   c0::50020f23000063a9 disk       connected    configured   unknown
   c1                   fc-private connected    configured   unknown
   c1::220203708b69c32b disk       connected    configured   unknown
   c1::220203708ba7d832 disk       connected    configured   unknown

3. Unconfigure the fabric device.

   # cfgadm -c unconfigure c0::50020f2300006077

4. Verify that the selected fabric device is unconfigured.

   # cfgadm -al
   Ap_Id                Type         Receptacle   Occupant     Condition
   c0                 fc-fabric    connected    configured   unknown
   c0::50020f2300006077 disk       connected    unconfigured unknown
   c0::50020f23000063a9 disk       connected    configured   unknown
   c1                 fc-private   connected    configured   unknown
   c1::220203708b69c32b disk       connected    configured   unknown
   c1::220203708ba7d832 disk       connected    configured   unknown