ddi_rep_put8

, ddi_rep_put16

, ddi_rep_put32

, ddi_rep_put64

, ddi_rep_putb

, ddi_rep_putw

, ddi_rep_putl

, ddi_rep_putll

- write data to the mapped memory address, device register or allocated DMA memory address

Synopsis

#include <sys/ddi.h> 
#include <sys/sunddi.h>

void ddi_rep_put8(ddi_acc_handle_t handle, uint8_t *host_addr, 
     uint8_t *dev_addr, size_t repcount, uint_t flags);

void ddi_rep_put16(ddi_acc_handle_t handle, uint16_t *host_addr, 
     uint16_t *dev_addr, size_t repcount, uint_t flags);

void ddi_rep_put32(ddi_acc_handle_t handle, uint32_t *host_addr, 
     uint32_t *dev_addr, size_t repcount, uint_t flags);

void ddi_rep_put64(ddi_acc_handle_t handle, uint64_t *host_addr, 
     uint64_t *dev_addr,size_t repcount, uint_t flags);

Interface Level

Solaris DDI specific (Solaris DDI). The ddi_rep_putb(), ddi_rep_putl(), ddi_rep_putll(), and ddi_rep_putw() functions are obsolete. The ddi_rep_put8() function replaces ddi_rep_putb(). The ddi_rep_put32() function replaces ddi_rep_putl(). The ddi_rep_put64() function replaces ddi_rep_putll(). The ddi_rep_put16() function replaces ddi_rep_putw().

Parameters

handle

The data access handle returned from setup calls, such as ddi_regs_map_setup(9F).

host_addr

Base host address.

dev_addr

Base device address.

repcount

Number of data accesses to perform.

flags

Device address flags:

DDI_DEV_AUTOINCR

Automatically increment the device address, dev_addr, during data accesses.

DDI_DEV_NO_AUTOINCR

Do not advance the device address, dev_addr, during data accesses.

Description

These routines generate multiple writes to the mapped memory or device register. repcount data is copied from the host address, host_addr, to the device address, dev_addr. For each input datum, the ddi_rep_put8(), ddi_rep_put16(), ddi_rep_put32(), and ddi_rep_put64() functions write 8 bits, 16 bits, 32 bits, and 64 bits of data, respectively, to the device address, dev_addr. dev_addr and host_addr must be aligned to the datum boundary described by the function.

Each individual datum will automatically be translated to maintain a consistent view between the host and the device based on the encoded information in the data access handle. The translation may involve byte-swapping if the host and the device have incompatible endian characteristics.

When the flags argument is set to DDI_DEV_AUTOINCR, these functions treat the device address, dev_addr, as a memory buffer location on the device and increment its address on the next input datum. However, when the flags argument is set to DDI_DEV_NO_AUTOINCR, the same device address will be used for every datum access. For example, this flag may be useful when writing to a data register.

Context

These functions can be called from user, kernel, or interrupt context.

Attributes

See attributes(5) for descriptions of the following attributes:

See Also

ddi_get8(9F), ddi_put8(9F), ddi_regs_map_free(9F), ddi_regs_map_setup(9F), ddi_rep_get8(9F), ddi_device_acc_attr(9S)